Knowledge Center
Home > Support & Resource> Knowledge Center
  • 2018-01-08Solder Mask Layer & Paste Mask Layer


  • 2018-01-07PCB Structures: Vias, Pads, Lands, Dimensions, Traces, and Planes

    Summary:This article here is to help define the pcb structures and terms a designer will need to in order to complete their pcb design.

  • 2017-12-01Introduction to Vias

    Summary:In brief, each hole on the PCB can be called vias. From the point of view of function, vias can be divided into two categories: one is used as an electrical connection between the layers, and two is used as a device for fixing or positioning.

  • 2017-11-24Use for PCB All Layers

    Summary:The work layer can be broadly divided into 7 categories: signal layers, internal planes (internal power/ ground layer), mechanical layer, solder mask layer, silk screen layer, others and system work layer.

  • 2017-11-20Via Tenting, Plugging, and Filling

    Summary:There are many reasons a printed circuit board designer might want to have a via tented, plugged or filled.

  • 2017-11-15PCB Design Process & Workflow

    Summary:There are 11 steps to the PCB design process & work flow.

    < 1234567 >